3-w

What is ??

Tubular bags made from flat fabrics after welding at the backside are called as back seam bags. An ultimate finishing with NO poly of lamination on sides entitled “Back Seam”. This bag presents an International appearance.

Process

It is made on the back seam machine with special glue by putting Flat Fabrics and seaming both the ends to tubular form for a perfect finished Back seam bag with No poly of lamination on Sides and without any size variation on Width of bag.

Once the roll is ready after seaming at back, it is placed on the auto cutting and stitching machine for making the finished bags.

Technical Parameters

Benefits

1) No size variations in width and consistency is maintained as required
2) Bags are without any side poly and are with high finishing quality in appearance
3) Gives premium looks to the bags
4) There is never any problem in the online filling plants and it runs smoothly

Uses

Used mainly in Food packaging by big brands for international quality appearance to make the bags look premium

This bags are also very important in online filling plants because if any size variations then the plant will stop and hence this is very well know in International markets for the same

Comparison

Infrastructure

© Knack Packaging Private Limited. All Rights Reserved

x 

width


Circular Form
25 cm to 150 cm (10” to 60”)
Circular Form
25 cm to 150 cm (10” to 60”)

LENGTH


Available in ROLL form.

Inner. Ø – 70 mm and above.
Outer Ø – Minimum 300 mm

and above as per your requirement.

MESH


4×4
to
16×16

WEIGHT


Available in ROLL form.

30 GSM to 140 GSM

and above.

LAMINATION


12 Micron to 50 Micron
and above (10 GSM to 48 GSM)

STRENGTH


We can match
yourstrength in warp
way & weft way.

Elongation


As per your
requirement.

Printing


One Side
One / Two / Three colors.
Both Side
One / Two / Three colors.

* Note : These are our standard specifications but products with customized specifications are also available.